| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Engine/Hybrid System | Section: Emission Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000029LK00PX |
| Title: 2UZ-FE EMISSION CONTROL: PURGE VALVE: INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT PURGE VSV
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
20°C (68°F) |
23 to 26 Ω |
|
1 - Body ground |
Always |
10 MΩ or higher |
|
2 - Body ground |
If the result is not specified, replace the purge VSV.
|
(b) Inspect the purge VSV operation. (1) Check that air does not flow from ports. (2) Apply battery voltage across the terminals. (3) Check that air flows from ports. If operation is not as specified, replace the purge VSV. |
|
|